| Availability: | |
|---|---|
| Quantity: | |
Our 30 bar water-lubricated oil-free screw air compressor is purpose-built for PET bottle blowing lines.
Same frame, higher delivered flow, optimized for thin-wall and wide-mouth bottles.
Built on the proven machine frame, this upgraded model delivers greater air output without increasing footprint. It perfectly matches the demanding blow requirements of thin-wall lightweight containers and large-diameter wide-mouth PET bottles, helping you achieve stable molding quality and higher line throughput.
Class 0 oil-free compressed air eliminates hydrocarbon contamination risk, fully compliant with food & beverage packaging standards. Water-lubricated screw technology avoids oil carry-over, protecting your preforms and finished bottles from surface defects.
✅ ISO 8573‑1 Class 0 Oil-Free Clean Air
We adopt purified water for rotor lubrication and sealing. No lubricating oil enters the compression chamber. Class 0 clean compressed air is safe for direct contact packaging, ideal for PET blow molding, food processing, pharmaceutical and electronics industries.
✅ Optimized for Thin-Wall & Wide-Mouth PET Bottles
Custom rotor profile and stable air supply curve solve the molding difficulty of thin-wall lightweight bottles and large wide-mouth jars. Lower reject rate and consistent bottle quality for your high-speed blow molding machine.
✅ Higher Delivered Flow on the Same Frame
Upgraded airend design boosts air output while keeping the original machine dimension. No extra workshop space is required, helping you upgrade air capacity without renovating your factory layout.
✅ Two-Stage High-Pressure Compression, Stable 30 Bar Output
Two-stage screw compression structure provides steady 30 bar high-pressure air directly for PET blowing. No additional booster compressor is needed. Small pressure fluctuation ensures continuous and reliable blow molding operation.
✅ Excellent Water Injection Cooling & Energy Efficiency
Purified water works as both lubricant and coolant, achieving efficient heat exchange and low discharge temperature. Optional permanent magnet variable speed motor can bring 15–25% energy saving compared with conventional fixed-speed oil-free screw compressors.
✅ Low Maintenance & Long Service Life
Free of lubricating oil, oil filter and oil separator. Only regular replacement of water filter elements and sealing consumables. Carbon deposit and sludge problems are avoided, extending the working life of the screw airend and cutting your long-term OPEX.
| Name | Specification |
| Volume Flow | 30 m³/min |
| Working Pressure | 3.0 MPa/30 bar |
| Motor Power | 132kW+160 kW |
| Motor Efficiency (132 kW) | 96.7 |
| Motor Efficiency (160 kW) | 96.8 |
| Motor Protection Rating | IP55 |
| Insulation Class | Class F |
| Power Supply | 380V/3Ph/50Hz |
| Starting Method | Variable Frequency Soft Start |
| Transmission Type | Direct Drive |
| Discharge Temperature | Cooling water inlet temperature +15 °C |
| Noise Level | 86 dB(A) |
| Cooling Method | Water Cooling |
| Lubricating water amount | 500 L |
| Cooling Water Flow Rate | 76 t/h |
| Cooling Water Inlet/Outlet Size | DN125 |
| Air Outlet Size | DN65 |
| Dimensions (L×W×H) | 4200×2050×2250 mm |
| Unit Weight | 5200 kg |
Blow‑forming pressure is determined primarily by bottle design and mould qualification, not compressor hardware selection alone.
30 bar is the preferred option IF:
Your blow‑mold has been validated for final‑blow pressure at 28‑32 bar;
Main production portfolio includes lightweight still‑water bottles, wide‑mouth food jars, edible‑oil PET containers or certain hot‑fill bottles;
You aim to raise air‑flow capacity and cut running electricity expense. Under validated 30‑bar condition, identical‑frame hardware yields +5‑8% higher free‑air delivery and approximately 9% lower shaft‑power draw versus running same machine at 40 bar.
Select 40 bar variant IF:
Mass‑production of carbonated soft‑drink (CSD) bottles; petaloid bottle base requires higher forming pressure to guarantee anti‑cracking performance;
Mould specification explicitly requires 35‑40 bar final‑blow pressure.
Important reminder: Before lowering blow‑pressure from 40 bar down to 30 bar, perform physical bottle‑sample verification including wall‑thickness distribution and burst‑pressure testing to confirm mould compatibility.
PET Bottle Blowing
Light‑weight still‑water bottles, edible‑oil PET containers, large‑size wide‑mouth food jars, qualified hot‑fill PET vessels
Food & Beverage Packaging
Zero‑oil compressed‑air supply for food‑grade packaging manufacturing
Pharmaceutical Industry
Clean compressed‑air for packaging lines and auxiliary production procedures
Electronics & Semiconductors
Oil‑free high‑pressure gas supply for clean‑room workshops
High‑Pressure Nitrogen Boosting
Matched with on‑site nitrogen generator for laser‑cutting and electronic‑assembly processes
Laboratories & Research Institutes
Quiet, stable Class‑0 high‑pressure air‑supply for analytical instruments and experimental workflows
This water‑lubricated compressor achieves Class 0 purity by inherent mechanical design: zero oil enters compression chamber, rather than achieving low residual‑oil via post‑compression filtration.
Oil‑injected compressors fitted with high‑grade coalescing filters may achieve low oil‑vapour figures but cannot fully guarantee absolute zero‑oil output; filter ageing can bring hidden contamination risks. For PET blow‑molding, trace oil inside blow‑air may generate bottle surface fogging and potential flavour‑alteration risks for food‑beverage goods. Specify Class 0 air measured at blow‑machine inlet point, and configure downstream dryers & filters matched to full 30 bar flow rate.
Over a 10‑year equipment lifecycle, power consumption accounts for the dominant share of total ownership cost, exceeding initial procurement outlay. Running at validated 30‑bar working point brings tangible energy gains compared to over‑specifying to 40 bar for non‑CSD bottle types.
Variable‑frequency VSD drive further optimises part‑load performance for blow‑lines with shift‑based or fluctuating production volumes.
Routine servicing concentrates on water‑circuit and filter components:
Water‑filter element replacement: every 800‑1000 operating hours
Air‑filter inspection & replacement: every 2000 operating hours
Periodic water‑treatment cartridge inspection and water‑quality testing
No oil purchases, oil‑change labour or waste‑oil disposal are required, minimising operational downtime and environmental footprint.
Warranty Term: 12 months warranty from the date of shipment.
Rocky provides global technical support, complete spare parts supply, on-site service consultation and operation training. We can offer performance curves, dimension drawings, test reports and formal quotation upon your request.
Contact our engineering team today to get your customized quotation.
Q1: When should I choose the 30 bar compressor instead of the 40 bar model for PET blowing?
A1: Choose RWH‑292W‑30 if your mold is certified for 25–32 bar final blow pressure. It works for lightweight water bottles, wide‑mouth jars and edible oil containers with higher airflow and lower power consumption. The 40 bar model is required for CSD bottles with petaloid bases. Test bottle wall thickness and burst pressure before switching pressure.
Q2: Does the water‑injected design provide true Class 0 oil‑free air?
A2: Yes. Purified water lubricates and seals the compression chamber. There is no oil circuit. Air is inherently oil‑free, not relying on filters.
Q3: How do I know if RWH‑292W‑30 fits my blow machine cavities?
A3: Air consumption depends on cavity number, bottle volume and cycle time. Send us these parameters, and our engineers will calculate the required capacity and receiver tank size.
Q4: What are the cooling water requirements?
A4: Cooling water flow: 76 t/h, DN125 connection. Air outlet temperature is about 15 °C above cooling water inlet temperature. Use softened, clean water. Max ambient temperature: 45 °C.
Q5: What documents and after‑sales support are available for export orders?
A5: We provide commercial invoice, packing list, HS code, CO (upon request), operation manual, drawings, P&ID, spare parts list (English / Russian), and FAT report. Commissioning and training are optional.
Q6: Can it work in cold environments?
A6: The standard unit works up to 45 °C ambient. For sub‑zero areas, select the optional winter protection kit with water circuit heaters and cold‑start guidance.