You are here: Home » Products » Oil Free Air Compressor » Oil-Free PET Bottle Air Compressor » RWH-250W 40 Bar Two-Stage PM VSD Water-Injected Oil-Free Screw Compressor | Rocky Compressor

RWH-250W 40 Bar Two-Stage PM VSD Water-Injected Oil-Free Screw Compressor | Rocky Compressor

1. Air delivery: 20m 3/min 290cfm
2. Pressure: 2.5~4.0MPa/25~40 bar/362.5~580 psi
3. Power: 250kW/350hp
Availability:
Quantity:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
kakao sharing button
snapchat sharing button
telegram sharing button
sharethis sharing button

40 Bar Two-Stage Permanent Magnet VSD Oil-Free Water-Injected Screw Compressor Model RWH-250W for PET Bottle Blow Molding

Model: RWH-250W | Air Delivery: 20 m 3/min (290 CFM) | Pressure Range: 2.5-4.0 MPa / 25-40 bar (362-580 psi) | Motor Power: 250 kW / 350 HP

Product Description

The RWH-250W two-stage water-lubricated oil-free screw compressor is purpose-built for high-demand PET stretch-blow molding and other industrial processes requiring contamination-free high-pressure compressed air.

Instead of mineral lubricating oil, purified water acts as the medium for lubrication, sealing and cooling inside the compression chamber, delivering ISO 8573-1 Class 0 100% oil-free compressed air without downstream heavy oil-removal filter systems.

Equipped with permanent-magnet variable-speed drive (PM VSD), this high-pressure screw unit supports stable 24-hour continuous-duty operation for beverage-grade PET bottle production, food processing, pharmaceutical and clean-room manufacturing.

Compared with traditional high-pressure piston boosters, two-stage screw compression brings higher flow output, lower noise, less vibration and extended service cycles for mass bottle-blowing lines.


The unit delivers ISO 8573-1 Class 0 100% oil-free compressed air, the strictest purity class in the ISO 8573-1 standard, verified by third-party oil-content testing.

Water is used only for internal lubrication and cooling, and is removed by the built-in separator before air enters the discharge line; the delivered air contains zero oil aerosol, oil vapor and liquid oil.

RWH-250W (7)

Product Advantages

Up to 15 to 25 percent energy saving

The permanent magnet variable-speed drive adjusts output to real-time air consumption and cuts power cost for round-the-clock PET production.

Higher air output

Two-stage compression with intermediate cooling delivers up to 20 percent more airflow under the same 250 kW motor power, meeting peak demand of multi-cavity blow molders.

Extended service life

Optimized rotor-bearing load reduces mechanical stress, and near-isothermal water-injected compression lowers operating temperature to extend core component service intervals.

Reduced operating expense

No compressor-oil consumption, fewer wearing parts and simplified maintenance, so plant-side servicing workload is lower than with an oil-lubricated piston booster.

Stable high-pressure performance

The built-in inter-cooling system keeps discharge temperature low and holds steady output from 25 bar up to 40 bar, so preform forming quality stays consistent.

Space-saving integrated layout

The skid-mounted all-in-one cabinet saves workshop floor area compared with a separate piston booster plus receiver configuration.

Typical Applications

PET bottle stretch blow molding for mineral water, carbonated drinks, juice, edible oil and cosmetic bottles, including recycled PET production.

Food and beverage packaging lines where oil contamination would cause product recall risk.

Pharmaceutical production requiring clean compressed air for fermentation, coating and medical packaging.

Electronics and clean-room manufacturing needing oil-free high-pressure air.

High-pressure nitrogen boosting matched with PSA nitrogen generators for laser cutting and inert gas blanketing.


 

Packing: standard export fumigated wooden skid or case suitable for ocean shipment.

Lead time: fill in actual working days after deposit received.

Trade terms: FOB Shanghai, CIF and other terms on request.

Warranty: 12 months, consumable parts excluded.

Deliverables: operation manual, wiring diagram, factory test report.

Service: remote technical support, spare parts supply, on-site commissioning on request.

Customization: voltage, pressure and auxiliary configuration tailored to the project.


FAQ 

1. Does a water-injected compressor still need large downstream oil-removal filters?

A: no, oil contamination is eliminated at source and the unit meets ISO 8573-1 Class 0; high-pressure dryers and particle filters are still required to remove condensed moisture.


Q2. Can it run 24 hours continuously for mass-volume bottle blowing?

A: yes, the two-stage inter-cooled structure is designed for non-stop operation within the rated 25 to 40 bar range.


Q3. Can voltage and cold-climate configuration be customized?

A: yes, voltage, frequency and cold-weather packages are available; send your local grid data and ambient temperature for confirmation.


Q4. Can you supply a complete air station with dryer, receiver and filters?

A: yes, an integrated proposal is prepared from blow molder quantity, bottle specification and peak air consumption.


Previous: 
Next: 

Quick Links

Products

Contact Us

Telephone: +86-173-2106-2761
 WhatsApp: +8617321062761
Email:  Anna@rockymachinery.com
 Address: Room 604, #12, Powerlong Center, No.689 Xiwang Road, Jiading District, Shanghai, China
Leave Us A Message
Copyright © 2025 Shanghai Rocky Machinery Co., Ltd. All Rights Reserved.   沪ICP备2021037284号-2