You are here: Home » Products » Oil Free Air Compressor » Oil-Free PET Bottle Air Compressor » Class 0 Certified 40 Bar Oil-Free High Pressure Piston Pet Bottle Blowing Compressor

Class 0 Certified 40 Bar Oil-Free High Pressure Piston Pet Bottle Blowing Compressor

1. Air delivery: 10m 3/min/353cfm
2. Working Pressure : 4Mpa/40 bar 
3. Motor Power: 110kW/150HP
4. Speed: 470 RPM
5. Dimensions: 4050*1750*2380 mm
6. Weight: 5800 kg
Availability:
Quantity:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
kakao sharing button
snapchat sharing button
telegram sharing button
sharethis sharing button

Class 0 Certified 40 Bar Oil-Free High-Pressure Piston Compressor for PET Bottle Blowing

Product Overview

For PET bottle stretch‑blow moulding, even trace oil contamination leads to product recall and quality failure. Our Class 0 Certified 40 Bar Oil‑Free High‑Pressure Piston Compressor delivers 100% oil‑free compressed air conforming to ISO 8573‑1 Class 0, specially built for 24‑hour beverage, food and pharmaceutical PET bottle production.


A Class 0 Certified 40 Bar Oil-Free High Pressure Piston PET Bottle Blowing Compressor is a purpose‑built, reciprocating piston‑type air compressor engineered specifically to deliver 100% oil‑free compressed air at 40 bar (580 psi) – the precise pressure required for PET bottle stretch‑blow moulding. Unlike oil‑lubricated alternatives, this compressor utilises oil‑free lubrication technology (such as self‑lubricating piston rings or water‑injected systems) to eliminate any risk of oil contamination in the compressed air stream.


The unit is certified to ISO 8573‑1 Class 0 – the most stringent international standard for compressed air purity. Class 0 certification guarantees that the compressor discharges compressed air free of oil aerosols, oil vapours, and oil liquids originating from the compression process. This is a critical requirement for industries where even trace amounts of oil can compromise product safety, trigger costly recalls, or violate regulatory standards.

Designed for continuous 24/7 operation, this high‑pressure piston compressor typically features multi‑stage compression with intercooling to achieve the required 40 bar output efficiently. The reciprocating piston mechanism is the industry‑proven technology of choice for PET blow‑moulding applications, offering reliable performance, stable pressure output, and extended service life under demanding production conditions. Many modern designs incorporate Variable Frequency Drive (VFD) technology to optimise energy consumption by matching air supply to real‑time plant demand.

40-bar Class Oil-Free Piston Compressors

Key Technical Specifications

Air delivery (FAD)

10 m³/min (353 cfm)

Working pressure

4.0 MPa / 40 bar / 580 psi

Motor power

110 kW / 150 HP

Compression stages

Four, with intercooling and aftercooler

Piston sealing

PTFE self-lubricating piston rings and guide rings, dry running

Air quality

ISO 8573-1 Class 0 certified; oil-free at source

Cooling

Air-cooled: intercoolers and aftercooler

Running speed

470 rpm

Control

PLC load/unload, optional VFD

Dimensions (L × W × H)

4050 × 1750 × 2380 mm

Weight

5800 kg

Installation

Skid-mounted; no special foundation required

Overhaul interval

4,000–6,000 operating hours

Main Product Features 

Seven design points decide how a 40 bar piston compressor behaves on a blowing line. Each is described below, together with what it changes in production.

ISO 8573-1 Class 0 Air, Oil-Free at the Source

The compression chamber contains no oil and no water. PTFE piston rings and guide rings seal the pistons dry, and a distance piece with scraper rings keeps crankcase lubricant away from the cylinders, so the air never meets oil at any stage of compression. Class 0 is a property of the machine, not of a filter change schedule.

On your line: the air-quality record you hand to a food-safety auditor is a machine specification — there is no separator element to expire, no oily condensate to treat and no filter that can be overdue.

Stable 40 Bar for Stretch-Blow Moulding

PET stretch-blow moulding runs in two pressure phases: pre-blow at around 8–12 bar to stretch the preform, then final blow at 25–40 bar to form the bottle against the mould. Most standard bottles need the supply held at 35–40 bar. Four stages with intercooling reach that pressure with a low ratio in each cylinder, so the final stage is not running against a temperature ceiling.

On your line: a correctly sized high-pressure receiver damps the cyclic pulsation that reciprocating compression produces, holding the pressure band steady at the mould and keeping wall thickness consistent across cavities.


Dry-Running Piston Technology

PTFE rings and guide rings carry the sealing duty without liquid lubrication. There is no oil to add, no oil filter, no oil separator and no oil-water condensate to dispose of; the maintenance schedule contains wear parts only.

On your line: lower consumable spend, no oil-disposal paperwork, and no risk of an operator filling the wrong point on a weekend shift.

Four-Stage Compression with Intercooling

Intercoolers between stages return the air toward ambient temperature before the next stage, so each cylinder compresses cooler, denser air. Lower stage temperatures reduce specific power at 40 bar and extend valve and ring life.

On your line: kilowatts per cubic metre that hold their value across the overhaul interval instead of drifting upward as the machine ages.

Built for 24/7 Duty

Low-speed running gear at 470 rpm, generously sized bearings and a 5,800 kg cast frame keep wear rates and vibration low. Overhaul intervals extend to 4,000–6,000 operating hours.

On your line: maintenance is a planned item — valves, PTFE rings, packings and gaskets — not an emergency call. One machine means one service plan and one set of spares.

Skid-Mounted, No Foundation

The package arrives piped, wired and mounted on a single skid measuring 4050 × 1750 × 2380 mm. It is set down on a normal industrial floor and connected to your receiver, dryer and high-pressure filters.

On your line: installation measured in days rather than weeks, and a package that can be relocated if the line layout changes.

Optional VFD for Part-Load Duty

Where bottle sizes or line speeds change through the day, a variable frequency drive follows real air demand instead of loading and unloading against a fixed band; typical part-load saving is 25–40%. On a line running at constant output, the fixed-speed unit with a correctly sized receiver is the simpler choice.

On your line: you pay for the air the moulders actually use, not for the pressure band they sit inside.


Oil-Free Piston vs Oil-Free Screw at 40 Bar


Oil-Free Piston vs Oil-Free Screw at 40 Bar: Which Fits Your Blowing Line?

Both technologies can deliver Class 0 air to a blow moulder, and both are sold as oil-free. The differences that decide the purchase are how each machine reaches 40 bar, what sits inside the compression chamber, how much cooling water the plant has to supply, and how easily you can prove oil-free air to a customer or an auditor.

At 40 bar, an oil-free screw is normally a water-injected two-stage machine, or a lubricated screw feeding an oil-free piston booster through filters and a carbon tower. The table compares those packages as one group against a single reciprocating machine, because the buying decision is the same: flow, running hours, utilities and proof.



Criteria

Oil-free piston (this unit)

Oil-free screw at 40 bar

How 40 bar is reached

Four intercooled reciprocating stages

Water-injected two-stage, or screw plus piston booster

Inside the compression chamber

No oil, no water — dry PTFE rings

Treated water; or oil in the screw stage, filtered out

Where the oil-free claim comes from

Oil-free at source; nothing to filter

Class 0 at outlet; depends on water or filter upkeep

Pressure output

Cyclic pulsation, damped by the receiver

Continuous, low pulsation

Flow per unit at 40 bar

3.5–20 m³/min (120–730 cfm)

From 5 m³/min upward; larger by combining units

Specific power

Good at low and medium flow; rises with wear

Lower at high flow on continuous duty

Part-load behaviour

Step control; VFD over a limited range

Wide VFD range

Cooling and utilities

Air-cooled; no cooling water

Needs cooling water, tower and treatment

Wear parts

PTFE rings, valves, packings, gaskets

Water consumables and bearings, or oil, filters, carbon, booster rings

Service rhythm

Overhaul every 4,000–6,000 h; one machine

Fewer wear parts, more consumables to track

Footprint and installation

Larger skid; no foundation or tower

Compact, but may need cooling-water works

Noise and vibration

Higher vibration; pads and canopy specified

Lower vibration, moderate noise

Upfront cost at 40 bar

Lower, especially below 700 cfm

Higher, plus water infrastructure

Best fit

1–2 moulders to ~20 m³/min, no spare cooling water, air audited

Large lines on 24/7 duty, power cost dominant, water available


How to choose in three questions

Flow. How much 40 bar air do you need, with margin? Below roughly 700 cfm (about 20 m³/min) an oil-free reciprocating machine is the simpler and lower-cost choice. Above that, a screw or screw-plus-booster package, or two reciprocating units, is the better fit.

Proof. Will anyone test your air? Oil-free at source is the easiest position to defend, because there is no filter or carbon bed whose change record has to be produced at audit.

Utilities. Do you have cooling water to spare? If not, the piston package avoids a cooling tower, a pump set and water treatment altogether.

Where this 10 m³/min unit sits

At 353 cfm this model is comfortably inside the reciprocating range: one machine covers a typical single-line PET blowing duty, with a second unit for redundancy if the line cannot stop. If your demand is above roughly 700 cfm, compare a 40 bar water-injected oil-free screw compressor before you specify — the two technologies are complementary, and our engineers will quote both against the same duty.

Typical Applications

The unit is specified wherever 40 bar oil-free air has to be available on demand and the plant does not want to run a water-treatment system.


· PET stretch-blow moulding for still water, carbonated soft drinks, juice, edible oil and cosmetic bottles

· Food-grade and pharmaceutical packaging lines where oil contamination is a recall risk

· Replacement of ageing three-stage piston units, reusing the existing receiver, dryer and high-pressure filters

· Plants without spare cooling-water capacity, or where a cooling tower is not practical

· Pressure testing, leak detection and industrial gas boosting up to 40 bar

· Lines running one or two blow moulders, where a single easily serviced machine is preferred to a two-machine package.

Applications for 40-bar Class Oil-Free Piston Compressors

Customer Case Study

Customer Case Study: ERC, Dubai — Class 0 Air for Jeema Mineral Water


Challenge. ERC, a landmark beverage producer in Dubai, runs a high-volume PET bottling line for its Jeema mineral water brand. Food-safety standards required 100% oil-free air at 40 bar for bottle blowing, because any oil carry-over would compromise taste and consumer safety. The plant also wanted lower energy costs and lower noise than its ageing three-stage piston compressors.

Solution. ERC installed this Class 0 certified 40 bar oil-free high-pressure piston compressor, which delivers ISO 8573-1 Class 0 air — zero oil aerosol, zero vapour, zero liquid — with stable 40 bar output for stretch-blow moulding. The four-stage compression design also runs with significantly lower noise and vibration than the conventional units it replaced.

Results.

  • Contamination-free production, with Class 0 air at the blowing line.

  • 7% lower energy consumption than standard alternatives, attributed to the four-stage design.

  • Lower noise and vibration, and a better working environment for operators.

  • Full compliance with food-grade packaging requirements, with no oil-handling or oil-disposal routines.

Case Study 40-bar Class Oil-Free Piston Compressor

FAQ

Q1. What is the difference between Class 0 and Class 1?

Class 1 caps oil at 0.01 mg/m³. Class 0 is a stricter level agreed between supplier and user, and this compressor meets it by keeping oil out of the compression chamber entirely, not by filtering it out.

Q2. Is this compressor suitable for food and beverage packaging?

Yes. The air is oil-free at source, so it supports food-safety programmes built around HACCP. Final compliance depends on the whole system — receiver, dryer and filters — which our engineers size with you.

Q3. What maintenance does it need, and how often?

Service every 4,000–6,000 operating hours, with an overhaul at the same interval. Wear parts are PTFE rings, guide rings, valve plates, packings and gaskets — no oil change, no oil filter and no separator element.

Q4. How do I size a unit for my blow moulders?

Send mould count and cavities, bottle sizes, cycle rate and blowing pressure, and we calculate the required m³/min with margin. This model delivers 10 m³/min (353 cfm) at 40 bar, and one unit can feed two moulders if their combined demand fits.

Q5. What air treatment is required downstream?

A high-pressure receiver, a dryer holding the pressure dew point your bottles require, and high-pressure filters. Condensation in the blowing air causes bottle defects, so this belongs in the specification.

Q6. Do you supply spare parts?

Yes — PTFE rings, guide rings, valve plates, packings and gaskets as original parts, with a recommended spares holding for the first overhaul.


Request a Quote

Get Quotation & Solution Now

Previous: 
Next: 

Quick Links

Products

Contact Us

Telephone: +86-173-2106-2761
 WhatsApp: +8617321062761
Email:  Anna@rockymachinery.com
 Address: Room 604, #12, Powerlong Center, No.689 Xiwang Road, Jiading District, Shanghai, China
Leave Us A Message
Copyright © 2025 Shanghai Rocky Machinery Co., Ltd. All Rights Reserved.   沪ICP备2021037284号-2